Streaming Metrics to Chainflip

Node operators often fear the prospect of being slashed, which is a prevalent issue. The causes can vary widely, from network disruptions to a lack of available disk space to running on under-resourced machines.

To assist Chainflip in understanding why your node is experiencing slashing, streaming your node metrics would be highly advantageous. Chainflip asks that you install process-exporter (opens in a new tab) and node-exporter (opens in a new tab) on your machines, so that we can scrape metrics using Prometheus (opens in a new tab).

Overview

The setup consists of the following components:

1. Install Node Exporter and Process Exporter.
2. Add configuration files.
3. Update your chainflip-node systemd file to expose substrate prometheus metrics.
4. Ensure that ports on your node are exposed to allow our Prometheus instance to access and scrape your metrics.

Install Node Exporter

Download Node Exporter Binary

cd /tmp
wget https://github.com/prometheus/node_exporter/releases/download/v1.5.0/node_exporter-1.5.0.linux-amd64.tar.gz

Create node_exporter User

sudo groupadd -f node_exporter
sudo useradd -g node_exporter --no-create-home --shell /bin/false node_exporter
sudo mkdir -p /etc/node_exporter
sudo chown node_exporter:node_exporter /etc/node_exporter

Unpack and Install Node Exporter Binary

tar -xvf node_exporter-1.5.0.linux-amd64.tar.gz
mv node_exporter-1.5.0.linux-amd64 node_exporter-files
 
sudo cp node_exporter-files/node_exporter /usr/local/bin/
sudo chown node_exporter:node_exporter /usr/local/bin/node_exporter
 
# Clean Up
rm -rf node_exporter-1.5.0.linux-amd64.tar.gz node_exporter-files

Setup Node Exporter Service

Run the following command to create a service file:

sudo nano /etc/systemd/system/node_exporter.service

Then copy and paste the following into the service file:

[Unit]
Description=Node Exporter
Documentation=https://prometheus.io/docs/guides/node-exporter/
Wants=network-online.target
After=network-online.target
 
[Service]
User=node_exporter
Group=node_exporter
Type=simple
ExecStart=/usr/local/bin/node_exporter --web.listen-address=:9100
 
[Install]
WantedBy=multi-user.target

Save and exit (CTRL+x then hit y then hit Enter)

Change the file permissions:

sudo chmod 664 /etc/systemd/system/node_exporter.service

Reload systemd and start the Node Exporter Service

sudo systemctl daemon-reload
sudo systemctl start node_exporter
sudo systemctl enable node_exporter

Check the Whole Setup

Check the status of Node Exporter

sudo systemctl status node_exporter

You should see something like the following:

Check whether Metrics are accessible

You can also verify that your node is exposing metrics by navigating to this url in a web browser:

http://<your_node_public_ip_address>:9100/metrics

You should see the raw metrics that the node exporter exposes:

Install Process Exporter

Setting up Process Exporter is a similar process as in the previous section.

Download Process Exporter Binary

cd /tmp
wget https://github.com/ncabatoff/process-exporter/releases/download/v0.7.10/process-exporter-0.7.10.linux-amd64.tar.gz

Create process_exporter User

sudo groupadd -f process_exporter
sudo useradd -g process_exporter --no-create-home --shell /bin/false process_exporter
sudo mkdir /etc/process_exporter
sudo chown process_exporter:process_exporter /etc/process_exporter

Unpack and Install Process Exporter Binary

tar -xvf process-exporter-0.7.10.linux-amd64.tar.gz
mv process-exporter-0.7.10.linux-amd64 process_exporter-files
 
sudo cp process_exporter-files/process-exporter /usr/local/bin/process_exporter
sudo chown process_exporter:process_exporter /usr/local/bin/process_exporter
 
# Clean Up
rm -rf process-exporter-0.7.10.linux-amd64.tar.gz process_exporter-files

Create Process Exporter Config File

sudo nano /etc/process_exporter/process-exporter.yaml

Then copy and paste the following into the file:

process_names:
  - comm:
      - chainflip-node
      - chainflip-engine

Setup Process Exporter Service

Run the following command to create a service file:

sudo nano /etc/systemd/system/process_exporter.service

Then copy and paste the following into the service file:

[Unit]
Description=Process Exporter for Prometheus
Documentation=https://github.com/ncabatoff/process-exporter
Wants=network-online.target
After=network-online.target
 
[Service]
User=process_exporter
Group=process_exporter
Type=simple
Restart=on-failure
ExecStart=/usr/local/bin/process_exporter \
  --config.path /etc/process_exporter/process-exporter.yaml \
  --web.listen-address=:9256
 
[Install]
WantedBy=multi-user.target

Save and exit (CTRL+x then hit y then hit Enter)

Change the file permissions:

sudo chmod 664 /etc/systemd/system/process_exporter.service

Reload systemd and start the Node Exporter Service

sudo systemctl daemon-reload
sudo systemctl start process_exporter
sudo systemctl enable process_exporter.service

Check the Whole Setup

Check the status of Process Exporter

sudo systemctl status process_exporter

You should see something like the following:

Check whether Metrics are accessible

You can also verify that your node is exposing metrics by navigating to in a web browser:

http://<your_node_public_ip_address>:9256/metrics

You should see the raw metrics that the process exporter exposes:

Expose Prometheus metrics for chainflip-node

chainflip-node is built using substrate (opens in a new tab) which uses Prometheus natively to expose metrics.

To make those metrics available you will have to override the default systemd file that ships with the package. To do so run the following:

sudo mkdir -p /etc/systemd/system/chainflip-node.service.d/
cat <<EOF | sudo tee /etc/systemd/system/chainflip-node.service.d/override.conf >/dev/null
[Service]
ExecStart=
ExecStart=/usr/bin/chainflip-node \
  --chain /etc/chainflip/perseverance.chainspec.json \
  --base-path /etc/chainflip/chaindata \
  --node-key-file /etc/chainflip/keys/node_key_file \
  --validator \
  --prometheus-external
EOF
sudo systemctl daemon-reload
sudo systemctl restart chainflip-node.service

If you want to learn more about systemd overrides, please refer to this page:

Modifying your systemd config

Check whether Metrics are accessible

You can also verify that your node is exposing metrics by navigating to in a web browser:

http://<your_node_public_ip_address>:9615/metrics

You should see the raw metrics that chainflip-node exposes:

Congratulations! You are successfully collecting metrics. 😎🎉

Update your promtail Config

In order to make it easier to connect the logs from your node to the metrics outlined in this tutorial, you need to add an extra label to the configuration file of your node under /opt/promtail/chainflip-promtail.yaml.

sudo nano /opt/promtail/chainflip-promtail.yaml

Then add a new label:

host: "your_node_public_ip_address"

Your config looks something like this:

Save your changes and restart promtail:

sudo systemctl restart promtail.service
sudo systemctl status promtail.service

Expose Prometheus metrics for chainflip-engine

The chainflip-engine integrates prometheus natively to expose metrics.

To make those metrics available you will have to modify the engine config which can be modified with the following command:

sudo nano /etc/chainflip/config/Settings.toml

and add the following settings:

[prometheus]
hostname = "0.0.0.0"
port = 5566

Check whether Metrics are accessible

You can also verify that your node is exposing metrics by navigating to in a web browser:

http://<your_node_public_ip_address>:5566/metrics

Summary

Let's recap what we've done.

• Installed and configured Prometheus Node Exporter
• Installed and configured Prometheus Process Exporter
• Updated your chainflip-node systemd file to expose substrate prometheus metrics
• Updated your chainflip-engine config file to expose engine prometheus metrics
• Opened Ports 9100, 9256 and 9615
• Updated your promtail config to add a new label